Are you looking for those hard to find smaller steel crochet hooks? I have
them here! Size 12 (1.00mm) is the most commonly used size for making thread
animals. Size 16 (0.40mm) is the smallest hook I have and is for that
adventurous person looking for that tiny hook! Size 15 and 16 hooks come
with a clear plastic sheath for the tips.
Size 10 (1.3mm)
$1.85
Size 11 (1.1mm)
$1.85
Size 12 (1.00mm)
$1.85
Size 13 (0.85mm)
$1.85
Size 14 (0.60mm)
$1.85
Size 15 (0.50mm)
$3.00
Size 16 (0.40mm)
$4.00
Clover Soft
Touch Steel Crochet Hooks
If your
hands get tired and your fingers get sore while crocheting these hooks are the
answer to the relief you have been looking for! These hooks are lightweight and
ergonomic. The hook is designed to make crocheting comfortable for the fingers
and hand. It has a built in soft cushion for comfort and large sized numbers for easy
reading of hook size. It also comes with a steel cap to cover the tiny hook
tip while not in use. Click on image for larger size picture.
Clover No. 4
Clover
No. 6
Clover
No. 8
Size
1.25mm
Size
1.00mm
Size
.90mm
U.S. Size 10
U.S.
Size 12
Between size 12 & 13
$6.75
$6.75
$6.75
Clover No. 10
Clover No. 12
Clover No. 14
Size .75mm
Size .60mm
Size .50mm
U.S. Size 13
U.S. Size 14
U.S. Size 15
$6.75
$6.75
$6.75
Plated Steel
Needles for Lace and Miniature Knitting
Plated steel needles for lace and miniature knitting. Five needled per set.
These needles are tempered so as not to break while conforming in an
ergonomic fashion to the users hand. Bending is normal on these needles. The
LC77 are the finest steel knitting pins. They are unplated steel.
LC35
1.0mm
$5.00
LC77
.50mm
$7.00
Chenille Stems
Here are some chenille stems you can use as armature in your bears/animals.
Insert these chenille stems in to the arm or other body part, lightly stuff
around them and then you can bend the piece into whatever position you want
it to have. There are two sizes to select from. Use the 3mm for smaller
bears and the 6mm for larger bears. You can always twist two or more stems
together if you need a thicker piece. There are 25 pieces in a pack.
3mm x 12 inch - 25
Pack
6mm x 12 inch - 25
Pack
$1.00
$1.00
Magnets
Here are some super strong little magnets you can use with your thread
animals! You can place them in the paws and your animals will hold hands or
items. If you place them in the feet it will allow your bear/animal to stand
on a metal base. I even have some that have a hole in the center so you can
sew it to the material.
Caution: These magnets may be tiny but they are very strong! Please keep them
away from computers & magnetic media such as disks, credit cards, video tapes,
etc.
3/16" x
1/16"
3/16" x
1/16"
1/4" X
1/32"
1/4" X
1/32"
5mm x
1.58mm
5mm x
1.58mm
6mm x
1mm
6mm x 1mm
with hole for sewing magnet to material
Solid
Magnet
Solid
Magnet
with hole for sewing magnet to material
$2.50 for
10 Magnets
$2.50
for 10 Magnets
$2.50 for
10 Magnets
$2.50 for
10 Magnets
Nap
Riser Brush
A small, fine, soft wire brush which is held between 2 fingers or on a
finger. You can use this brush to fluff up yarn. This brush works great for
fluffing Acrylic Punch Thread. It also works well for fluffing felt, seams
and other various yarns and threads or crafting projects that require a
brush to lift the nap. It's a small size and the fact that it fits on your
finger makes this a nice little brush to own!
The size is 1" H x 1-1/8" W
$3.75
Hollow
Punch Set
I found
some more of these small punch sets! Right now I have 18 in stock, but I am
not sure I will be able to get more. So if you want a set you may want to
get yours now.
Here
is a nice tool to have! You can use this hollow punch set for making white
circles for under your bear eyes. This handy tool makes perfect round circles
in a snap... or should I say... tap of your hammer. It comes with 6 punches in
sizes 1.5mm, 2mm, 2.5mm, 3mm, 4mm and 5mm. It also includes a handle for
punching by hammer. You can use these punches on fabric, plastic, leather
etc... You can even use this tool to make your own discs for jointing. I use a thick plastic cutting board for punching on with mine.
You can also use a wood cutting board. It can
cut into the plastic or wood, so make sure it is not your good cutting board!
Check
out the White Ultrasuede under the Bear Necessities link for material to
make circles to place under your bear eyes.
$7.80
2-1/2"
Bear
Needles
These
thin 2-1/2" needles are great for helping you place the arms on and legs on your
miniature bears.
You can adjust them until you are satisfied with the placement. Then you
thread them and pull your floss/thread through right where you need it!
2 for $1.50
Boyes Comfort Cushion
Beading Needles
This comfort cushion is a resilient 3.7" sleeve which will fit over
any steel or aluminum crochet hook up to a size G. It helps to
reduce stress on the hand while crocheting. It can be cut to any
length. Please note: This sleeve fits tight and is very hard to
remove. If you plan on putting it on more than one hook you may want
to either cut it for two or order more than one.
Super Fine # 8 Beading Needles. These beading needles will fit
through your smallest beads. Great for threading those tiny bear
eyes. There are 3 beading needles per package. These are nice long
flexible needles.
$3.00
$3.50
Tatting
Shuttles
Here are
some nice tatting shuttles by Clover and Susan. The size 16 perle cotton
thread that I sale works nicely with these shuttles.
Clover Tatting
Shuttles
Susan Bates Tatting
Shuttle
Each Package will have 2
shuttles in either pink and blue colors or yellow and green colors.
This
steel tatting shuttle has a removable bobbin, and an integral hook on
one end for making joinings.
$5.30
$3.25
2mm Zinc Coated Steel Shot
Here is
some zinc coated steel shot to give a little weight to your bears. You can
also use it in the feet to help make your bear stand. The steel will add the
weight. Zinc is an all natural earth product that is highly resistant to
corrosion. The Zinc and the Steel are non-toxic. This makes it a safe and
desirable product to use in your work.
6 oz Bag -
$1.95
Please
note that the Steel Shot is very heavy to ship and may result in
additional postage needed to ship your order other than what the
shopping cart will charge. You will be notified if additional postage is
needed for your order. This usually happens with multiple purchases of
the shot.
Prisma Pencils
You can use these artist
pencils to shade and accents your bears/animals around the eyes, ears and
nose. They add a nice touch to your bears/animals.
Light Umber
Dark Umber
Expresso
$1.95
$1.95
$1.95
Sepia
Dark Brown
Black
$1.95
$1.95
$1.95
Cool Grey 90%
$1.95
Round Nose Pliers
These round nose pliers are my choice for turning Cotter Pins. Not only can
they be used for turning pins, but they can also be used as regular pliers
(for pulling needles through etc...). The round design of the nose makes it
easy to turn the cotter pins. This is a nice multi-function tool. 4-1/2" in
size